General information:

The RIGIDAL 6 is an angular trapezoidal-ribbed profile of SIX troughs and SEVEN ribs. The profile depth of 32mm gives it remarkable strength that suits its use in roofing and walling (i.e. cladding) primarily in industrial applications.

The RIGIDAL 6 may be crimped into curves of minimum 400mm radius to enhance its use and aesthetic properties. This is also may serve the place of fascia board.

Applications:

Cladding (roofing/walling)
Decking.
False ceiling
Poultry farm roofing
May be used with Roman tiles to enhance security leak-proof and cost saving
(Since it does not require rafters or battens).

SPECIFICATIONS

Dimensional Drawings

Thickness: 0.4MM to 1.4MM with a tolerance + 10%
Length: Any length from 1.0M in steps of 0.5M to a maximum of 12M.

RESINCOT COLOURS:
TOP: Tile Red, Sky Blue, Bright Blue, Dark Green, Brick Red, Light Cream
and Kraft Grey.
BOTTOM: Backer grey.
Colour available on request (minimum 300M)

COVER-WIDTH: 0.90M to calculate number of sheets (N)
N=W/0.90 pieces.
(Where N=sheets in pieces & W=linear width of the roof in meters)

Maximum allowable loads (KGS/M2):